Chery Industrial 10ft Workbench System – 30 Drawers

All-in-One 10ft Industrial Workbench Storage System – Maximum Organization with Pegboard Efficiency

Ten feet of structured, professional-grade workspace — drawers that separate tools properly, cabinets that clear the clutter, and a pegboard that keeps what you use most always within arm's reach.

SOUND FAMILIAR?

• Your storage has grown, but your organization hasn't. Random cabinets, overloaded toolboxes, and drawers that became catch-alls instead of systems — you have places to put things, just not the right places.
• You're losing time in a workspace that should be saving it. Every minute spent searching for a tool mid-job is a minute your setup is working against you instead of for you.
• Separate storage units never add up to a real system. Toolboxes over here, a cabinet there, a pegboard somewhere across the shop — nothing is connected, nothing lines up, and the whole setup falls short of what a serious workspace actually needs.
• An 897 lb professional workstation arriving in pieces is the wrong kind of project. You need your shop upgraded, not a full assembly day before you can even begin organizing.

WHAT YOU GET

30 Drawers in Three Sizes — Proper Separation for Every Tool Category Forty-four to ninety-nine pounds of capacity per drawer across 30 individual compartments sized to match how tools actually need to be stored. Shallow drawers for small accessories and hardware, mid-depth drawers for everyday hand tools, and deep drawers for larger or bulkier items. Full-extension ball-bearing slides bring every drawer out completely and smoothly — organized access to everything, every time, without digging or guessing.

2 Full-Size Cabinets — Bigger Equipment Cleared Off the Floor Power tools, large equipment, and bulk supplies that take up valuable floor space or end up scattered around the shop finally have a clean, dedicated home — built directly into the workstation so everything stays in one organized footprint.

Integrated Pegboard — Instant Access to Your Most-Used Tools The tools you reach for constantly during a job shouldn't live in a drawer. The built-in pegboard keeps them hanging in plain sight, right at the workstation, immediately accessible without opening a single compartment. High-frequency tools stay visible, organized, and always within reach.

Massive 10ft Reinforced Work Surface · Up to 1,653 lb Capacity At 112 inches wide and nearly one inch thick, this surface is built for environments where tools are constantly in motion and real loads are a daily reality. Heavy assemblies, equipment repairs, and demanding production work — all handled on a stable powder-coated Q235 steel surface that doesn't flex, shift, or wear down under serious use.

Integrated Lock System — Everything Secured with One Key All 30 drawers and both cabinets lock down together at the end of the day. Tools stay protected in shared workspaces and professional environments, and your setup is exactly as you left it when you return.

PVC Anti-Slip Liners in Every Drawer Tools stay sorted and in place across all 30 compartments. No rattling, no sliding, no finding drawers in disarray after a busy session of pulling and closing them throughout the day.

Arrives 100% Fully Assembled — All 897 lbs of It No hardware to sort, no panels to align, no instructions to decode. Position it in your space, load your tools, and immediately replace scattered storage with one complete, structured system — no setup phase, no lost day getting started.

BUILT AROUND REAL WORK

• 1,653 lb worktop capacity — a surface built for high-volume, heavy daily use
• 30 drawers in three sizes — proper separation for every tool, part, and hardware category
• 44–99 lbs per drawer — capacity calibrated to what each drawer size is designed to hold
• 2 full-size cabinets — clears power tools, equipment, and bulk supplies off the floor
• Integrated pegboard — high-frequency tools visible, accessible, and always at the workstation
• 10 feet wide — one complete footprint that replaces multiple scattered storage solutions
• 0 minutes assembly time — productive from the moment it arrives
• 5-year limited warranty — backed by Chery Industrial

BUILT TO LAST

18-Gauge Galvanized Steel Frame Industrial-grade and rust-resistant — built for high-volume mechanics, production environments, large repair facilities, and serious professional workspaces where storage needs to perform reliably under constant daily heavy use.

Powder-Coated Q235 Steel Worktop Nearly one inch thick and chip-resistant — engineered to handle the daily punishment of a serious industrial shop without denting, warping, or losing its finish over time.

Full-Extension Ball-Bearing Slides All 30 drawers open completely and smoothly at capacity — no half-extensions, no binding, no degradation after years of high-volume daily use.

Full-Width Aluminum Alloy Handles Easy to grip across the full ten-foot workstation, and built to stay solid through thousands of daily opens and closes in demanding professional environments.

Integrated Locking System One key. All 30 drawers. Both cabinets. Fully secured.

DELIVERY INFO

This product ships via freight at no additional cost from a US warehouse, with delivery typically taking 6 to 12 business days. Due to its size and weight, freight shipping is required. Please note that liftgate service is not available for this item — the customer is responsible for unloading upon delivery. We recommend having a forklift, loading dock, or additional help available at the time of delivery.

READY TO REPLACE SCATTERED STORAGE WITH ONE SYSTEM THAT ACTUALLY WORKS?

Fully assembled. Free freight shipping. 5-year warranty. Thirty drawers across three sizes, two full-size cabinets, an integrated pegboard, and ten feet of industrial-grade work surface — one complete workstation that brings structure, speed, and organization to a workspace that's been running without it.

Available Finish

Industrial Powder-Coated Steel

• Brand: Chery Industrial
• Product Type: 10ft Workbench Storage System with Pegboard
• Material: 18-Gauge Galvanized Steel
• Desktop Material: Q235 Steel + Powder Coated Finish
• Surface Finish: Powder-Coated Rust-Resistant Steel
• Overall Dimensions: 112" W x 22.9" D x 70.6" H
• Shipping Dimensions: 120" x 25" x 76"
• Weight: 897.3 lbs (product) / 787 lbs (shipping)
• Worktop Size: 112" x 22.9"
• Desktop Thickness: 0.98"
• Load Capacity (Top): Up to 1,653 lbs
• Drawer Capacity: 44 / 88 / 99 lbs (varies by drawer size)
• Drawer Count: 30
• Drawer Sizes:
  • 18.5" x 19.2" x 2.6"
  • 18.5" x 19.2" x 5.5"
  • 18.5" x 19.2" x 8.6"
• Cabinets: 2
• Pegboard: Yes (integrated)
• Drawer Slides: Full-extension ball bearing slides
• Handles: Aluminum alloy full-width handles
• Drawer Pads: PVC anti-slip liners
• Lock System: Yes
• Assembly: Fully assembled (no setup required)
• Warranty: 5-Year Limited Warranty
• Shipping: US warehouse dispatch, estimated delivery 6–12 business days — standard freight, forklift or equivalent is required for unloading