Chery Industrial 10ft Workbench - 30 Drawers

Industrial 10ft Heavy Duty Workbench – Ultimate 30-Drawer Storage for Professional Workspaces

When the problem isn't more storage — it's better control. Thirty dedicated drawers, ten feet of stainless steel work surface, and one system built to bring real structure back to a high-volume professional workspace.

SOUND FAMILIAR?

• Your drawers stopped being organized and started being storage. Everything ends up in the same compartments, tools get mixed with hardware, and finding anything specific takes longer than it should mid-job.
• You clean it up, and within a week it's back to the same state. Without proper structure built into the system, organization doesn't stick — it just resets to chaos.
• Your work surface takes more punishment than your bench was built for. Heat, chemicals, heavy loads, and constant daily use degrade standard steel tops faster than most people expect.
• 640 lbs of professional workbench arriving in pieces is the last thing a busy shop needs. Setup time is dead time — you need it ready, not a project.

WHAT YOU GET

30 Dedicated Drawers — Clean Separation Across Every Tool Category Eighty-eight pounds of capacity per drawer across 30 uniform compartments, each sized at 18.5" x 19.2" x 3.6" for consistent, reliable organization. Hand tools, precision instruments, hardware, fasteners, and accessories each get a dedicated home — no catch-all drawers, no mixed compartments, no more digging mid-job. Full-extension ball-bearing slides bring every drawer out completely and smoothly, so nothing gets buried at the back.

201 Stainless Steel Work Surface · Up to 1,653 lb Capacity This is what separates this model from the rest of the 10ft lineup. The 201 stainless steel top resists heat, chemicals, staining, and the hard daily use of a professional shop in ways that powder-coated steel simply can't match. At 1.2 inches thick and 113 inches wide, it cleans easily after mechanical or industrial work, stays stable under serious loads, and holds up to years of constant use without degrading. For professionals who use their bench all day, every day, the surface upgrade matters.

Ten Feet of Structured, Professional Workspace At 113 inches wide, this workbench consolidates everything into one organized footprint. Tools, hardware, and work surface all in the same place — no walking the shop, no piecing together what you need from three different storage units. Everything is right where you're standing.

Full-Width Handles — Fast Access Under Any Conditions Full-width aluminum alloy handles run the length of every drawer front. Whether you're wearing gloves, moving fast mid-job, or pulling a fully loaded drawer, access is deliberate and effortless every time.

Integrated Lock System — Structure and Security Together All 30 drawers lock down with a single key at the end of the day. Tools stay protected in shared shops, commercial spaces, and professional environments where both organization and accountability matter.

PVC Anti-Slip Liners in Every Drawer Tools stay sorted and in place across all 30 compartments. No rattling, no sliding, no finding the drawer in disarray the next time you open it after a busy session.

Arrives 100% Fully Assembled — All 640 lbs of It No hardware to sort, no panels to align, no instructions to decode. Place it in your workspace, load your tools, and immediately replace an unstructured setup with one that's built to stay organized under real daily pressure.

BUILT AROUND REAL WORK

• 1,653 lb worktop capacity — stainless steel surface built for the hardest daily professional use
• 30 drawers at 88 lbs each — uniform, consistent storage across every compartment
• 1.2-inch stainless steel top — resists heat, chemicals, staining, and years of hard use
• 113 inches wide — ten feet of consolidated workspace in one structured footprint
• 0 minutes assembly time — productive from the moment it arrives
• 5-year limited warranty — backed by Chery Industrial

BUILT TO LAST

18-Gauge Galvanized Steel Frame Industrial-grade and rust-resistant — engineered for high-output shops, commercial repair facilities, and professional workspaces where the bench is in constant daily use and needs to hold up without compromise.

201 Stainless Steel Worktop — The Premium Surface Upgrade Where powder-coated steel shows wear over time, stainless holds up. Heat resistant, easy to clean, harder to stain, and built to maintain its surface integrity through years of mechanical, industrial, and heavy-duty shop use. The choice for professionals who work on their bench, not just around it.

3-Section Ball-Bearing Full-Extension Slides All 30 drawers open completely and smoothly at capacity — no half-extensions, no binding, no degradation after years of high-volume daily use.

Full-Width Aluminum Alloy Handles Fast to grip, comfortable under load, and built to stay solid through thousands of daily opens and closes in demanding professional environments.

Integrated Locking System One key. All 30 drawers. Fully secured.

DELIVERY INFO

This product ships via freight at no additional cost from a US warehouse, with delivery typically taking 6 to 12 business days. Due to its size and weight, freight shipping is required. Please note that liftgate service is not available for this item — the customer is responsible for unloading upon delivery. We recommend having a forklift, loading dock, or additional help available at the time of delivery.

READY TO BRING REAL STRUCTURE BACK TO A HIGH-VOLUME WORKSPACE?

Fully assembled. Free freight shipping. 5-year warranty. Thirty dedicated drawers, ten feet of 201 stainless steel work surface, and a system built not just to store your tools — but to keep them organized under the pressure of real daily professional use.

Available Finish

Silver — 201 Stainless Steel Top

• Brand: Chery Industrial
• Product Type: 10ft Heavy Duty Workbench Storage Cabinet
• Material: 18-Gauge Galvanized Steel
• Desktop Material: 201 Stainless Steel
• Surface Finish: Powder-Coated Rust-Resistant Frame
• Overall Dimensions: 113" W x 23.6" D x 38.2" H
• Shipping Dimensions: 114" x 26" x 48"
• Weight: 640 lbs (product) / 613 lbs (shipping)
• Worktop Size: 113" x 23.6"
• Desktop Thickness: 1.2"
• Load Capacity (Top): Up to 1,653 lbs
• Drawer Capacity: 88 lbs per drawer
• Drawer Count: 30
• Drawer Size: 18.5" x 19.2" x 3.6"
• Drawer Slides: 3-section ball bearing slides
• Handles: Aluminum alloy full-width handles
• Drawer Pads: PVC anti-slip liners
• Lock System: Yes
• Assembly: Fully assembled (no setup required)
• Warranty: 5-Year Limited Warranty
• Shipping: US warehouse dispatch, estimated delivery 6–12 business days — standard freight, forklift or equivalent is required for unloading