Chery Industrial 10ft Workbench - 35 Drawers

Industrial 10ft Heavy Duty Workbench – Maximum 35-Drawer Storage for Ultimate Organization

Thirty-five drawers. Ten feet of reinforced work surface. One system that finally gives every tool, part, and piece of hardware a permanent, organized home.

SOUND FAMILIAR?

• Your storage has a quantity problem and an organization problem. More drawers filled with the wrong mix of tools, more cabinets that became catch-alls, more time spent searching instead of working.
• High tool volume without structure just means high-volume chaos. When every category of hand tool, hardware, fastener, and specialty item shares the same overcrowded drawers, nothing is actually organized — it's just stored.
• Your workflow slows down every time your storage can't keep up. Stuck slides, half-extension drawers, and disorganized compartments aren't minor frustrations — in a busy shop, they add up to real lost time every single day.
• 655 lbs of professional workbench has no business arriving in a flat-pack. A system built to organize a serious shop should be ready to work the moment it's in place.
• WHAT YOU GET

35 Drawers in Three Sizes — Structured Storage for Every Tool Category Eighty-eight pounds of capacity per drawer across 35 individual compartments in three purposeful sizes. Shallow drawers for small precision tools and hardware, mid-depth drawers for everyday hand tools and accessories, and deeper drawers for larger or bulkier items. Every category gets its own dedicated space — no mixing, no digging, no wasted motion mid-job. Full-extension ball-bearing slides bring every drawer out completely and smoothly, even at full capacity.

1.2-Inch Reinforced Work Surface · Up to 1,653 lb Capacity At 113 inches wide and 1.2 inches thick, this is one of the most substantial work surfaces in the lineup. Heavy repairs, complex assemblies, large-scale projects, and demanding daily use — all handled on a stable powder-coated Q235 steel surface that doesn't flex, dent, or wear down under serious load. Available in Red or Blue to suit your space.

Ten Feet of Organized Workspace — Everything in One Structured Footprint At 113 inches wide, this workbench consolidates what most shops spread across multiple separate units. Tools, hardware, fasteners, and work surface — all in one organized system, right where you're standing, without walking the shop to piece together what you need.

Full-Width Handles — Fast Access Even With Gloves On Full-width aluminum alloy handles run the length of each drawer front, so you're not fumbling for a small pull mid-job. Grab, open, grab the tool, close — fast and deliberate every time.

Integrated Lock System — Every Drawer Secured with One Key All 35 drawers lock down together at the end of the day. Tools stay protected in shared shops, commercial spaces, and professional environments where accountability matters as much as organization.

PVC Anti-Slip Liners in Every Drawer Tools stay sorted and stable across all 35 compartments. No rattling, no sliding, no finding a drawer in disarray after a busy day of pulling and closing them throughout a job.

Arrives 100% Fully Assembled — All 655 lbs of It No hardware to sort, no panels to align, no instructions to decode. Place it in your workspace, load your tools, and go from disorganized to structured immediately — no setup phase, no lost time before you can begin.

BUILT AROUND REAL WORK

• 1,653 lb worktop capacity — 1.2 inches thick, built for the heaviest daily shop work
• 35 drawers in three sizes — structured separation for every tool and hardware category
• 88 lbs per drawer — consistent heavy-duty capacity across all 35 compartments
• 113 inches wide — ten feet of consolidated workspace replacing multiple scattered units
• 0 minutes assembly time — productive from the moment it arrives
• 5-year limited warranty — backed by Chery Industrial

BUILT TO LAST

18-Gauge Galvanized Steel Frame Industrial-grade and rust-resistant — engineered for high-output shops, commercial repair facilities, and professional workspaces where the bench is in constant daily use and needs to hold up without compromise.

1.2-Inch Powder-Coated Q235 Steel Worktop Available in Red or Blue — the thickest worktop in the 10ft lineup, chip-resistant and built to handle serious daily punishment without denting, warping, or degrading over time.

3-Section Ball-Bearing Full-Extension Slides All 35 drawers open completely and smoothly at capacity — no half-extensions, no binding, no degradation after years of high-volume daily use.

Full-Width Aluminum Alloy Handles Fast to grab, comfortable to use, and built to stay solid through thousands of daily opens and closes in demanding professional environments.

Integrated Locking System One key. All 35 drawers. Fully secured.

DELIVERY INFO

This product ships via freight at no additional cost from a US warehouse, with delivery typically taking 6 to 12 business days. Due to its size and weight, freight shipping is required. Please note that liftgate service is not available for this item — the customer is responsible for unloading upon delivery. We recommend having a forklift, loading dock, or additional help available at the time of delivery.

READY TO GIVE EVERY TOOL A PERMANENT HOME IN ONE COMPLETE SYSTEM?

Fully assembled. Free freight shipping. 5-year warranty. Thirty-five drawers across three sizes and ten feet of 1.2-inch reinforced work surface — the most drawer-dense 10ft workbench in the lineup, built for professionals who need true structure across high-volume tool inventories.

Available Finish

Industrial Powder-Coated Steel — available in Red or Blue

• Brand: Chery Industrial
• Product Type: 10ft Heavy Duty Workbench Storage Cabinet
• Material: 18-Gauge Galvanized Steel
• Desktop Material: Q235 Steel + Powder Coated Finish
• Surface Finish: Powder-Coated Rust-Resistant Steel
• Overall Dimensions: 113" W x 23.6" D x 38.2" H
• Shipping Dimensions: 114" x 25" x 42"
• Weight: 655 lbs (product) / 657 lbs (shipping)
• Worktop Size: 113" x 23.6"
• Desktop Thickness: 1.2"
• Load Capacity (Top): Up to 1,653 lbs
• Drawer Capacity: 88 lbs per drawer
• Drawer Count: 35
• Drawer Sizes:
  • 18.5" x 19.2" x 3.2"
  • 18.5" x 19.2" x 4.3"
  • 18.5" x 19.2" x 6.3"
• Drawer Slides: 3-section ball bearing slides
• Handles: Aluminum alloy full-width handles
• Drawer Pads: PVC anti-slip liners
• Lock System: Yes
• Assembly: Fully assembled (no setup required)
• Warranty: 5-Year Limited Warranty
• Shipping: US warehouse dispatch, estimated delivery 6–12 business days — standard freight, forklift or equivalent is required for unloading