Chery Industrial 10ft Rolling Workbench - 15 Drawers

10ft Heavy Duty Rolling Tool Workbench with 15 Drawers & 2 Locking Cabinets – Industrial Steel Storage Workstation by Chery Industrial

The storage capacity and stability of a full-size industrial workstation — with the mobility to bring all of it wherever the job demands.

SOUND FAMILIAR?

• Your large bench is exactly where you put it three years ago — and that's the problem. Shop layouts change, projects move, and a workstation that can't reposition becomes an obstacle instead of an asset.
• You need drawers for everyday tools and cabinets for bigger gear — not one or the other. A drawer-only system leaves power tools and bulky equipment without a home. A cabinet-only setup buries small tools in shared compartments. The right balance handles both.
• Most rolling options in this size range feel like oversized carts. Lightweight construction, limited drawer capacity, and a work surface that flexes under real loads — nothing like the industrial-grade setup a serious shop actually requires.
• 569 lbs of rolling workstation arriving in pieces defeats the purpose. If it's going to move, it needs to be ready from the moment it rolls off the pallet.

WHAT YOU GET

15 Heavy-Duty Drawers in Two Sizes — Organized Storage That Travels With You Eighty-eight to ninety-nine pounds of capacity per drawer across 15 dedicated compartments in two purposeful depths. Mid-depth drawers for hand tools, precision instruments, and daily-use accessories. Deeper drawers for larger tools, hardware sets, and bulkier items. Full-extension 3-section ball-bearing slides bring every drawer out completely and smoothly — full visibility, fast access, nothing left behind when the workstation moves.

2 Large Locking Cabinets — Power Tools and Bigger Gear Always With You Bulky equipment, power tools, and oversized supplies travel with the bench instead of staying behind in a separate cabinet on the other side of the shop. Both cabinets lock independently, keeping your most valuable gear protected whether the bench is parked or repositioning across the floor.

Full Mobility — Industrial Casters and Integrated Side Handles Move the entire ten-foot workstation wherever the job requires. Integrated side handles give you precise steering and control across any shop floor — around vehicles, between bays, through dynamic industrial environments — without wrestling it into position. Lock the casters when you're set and the bench holds firm under serious working loads.

Reinforced 1.2-Inch Work Surface · Up to 1,654 lb Capacity At 113 inches wide and 1.2 inches thick, this is a true industrial work surface — not a shelf on a rolling frame. Heavy machinery, engines, large assemblies, fabrication, and demanding daily use all handled on a stable powder-coated Q235 steel top that doesn't flex, dent, or wear down under serious load. Available in Red or Blue to suit your space.

Ten Feet of Mobile, Organized Workspace At 113 inches wide, this isn't a rolling tool cart — it's a complete industrial workstation on wheels. Drawers, cabinets, and work surface all travel together as one organized system, wherever the work takes you. No walking the shop, no separate storage left behind, no piecing together what you need from multiple locations.

Integrated Lock System — Everything Secured, Moving or Parked All 15 drawers lock down with one key. Both cabinets lock independently. Full tool security across the entire workstation in shared shops, commercial facilities, and industrial environments — whether the bench is locked in place or between positions on the floor.

PVC Anti-Slip Liners in Every Drawer Tools stay sorted and stable across all 15 compartments even when the bench is rolling between stations. No rattling, no sliding, no finding drawers in disarray after repositioning mid-session.

Arrives 100% Fully Assembled — All 569 lbs of It No hardware to sort, no panels to align, no instructions to decode. Roll it off the pallet, position it where the work is, load your tools, and get straight to work immediately.

BUILT AROUND REAL WORK

• 1,654 lb worktop capacity — a full industrial-grade surface that goes wherever the job goes
• 15 drawers in two sizes — organized storage for hand tools, hardware, and daily essentials
• 88–99 lbs per drawer — serious capacity across every compartment, rolling or stationary
• 2 independent locking cabinets — power tools and bigger gear travel with the bench
• Full caster mobility with side handles — precise control across any professional environment
• 1.2-inch worktop thickness — the same heavy-duty surface as the stationary model
• 0 minutes assembly time — mobile and productive from the moment it arrives
• 5-year limited warranty — backed by Chery Industrial

BUILT TO LAST

18-Gauge Galvanized Steel Frame Industrial-grade and rust-resistant — built for automotive repair shops, manufacturing facilities, commercial maintenance departments, and serious garages where the bench needs to perform reliably under daily heavy use, rolling or locked in place.

1.2-Inch Powder-Coated Q235 Steel Worktop Available in Red or Blue — chip-resistant and engineered to handle the daily punishment of demanding professional environments without denting, warping, or degrading through years of hard use.

3-Section Ball-Bearing Full-Extension Slides All 15 drawers open completely and smoothly at capacity — no half-extensions, no binding, no degradation after years of high-volume daily use whether the bench is moving or stationary.

Industrial Caster Wheels with Locking Brakes Built to move 569 lbs with control and hold it solid when locked. Smooth across any shop floor, stable under serious working loads once parked.

Full-Width Aluminum Alloy Handles Comfortable to grip for both steering the workstation and pulling drawers — built to stay solid through years of demanding professional use without loosening or wearing down.

Dual Locking System One key for all 15 drawers. Independent locks on both cabinets. Fully secured, moving or parked.

DELIVERY INFO

This product ships via freight at no additional cost from a US warehouse, with delivery typically taking 6 to 12 business days. Due to its size and weight, freight shipping is required. Please note that liftgate service is not available for this item — the customer is responsible for unloading upon delivery. We recommend having a forklift, loading dock, or additional help available at the time of delivery.

READY FOR AN INDUSTRIAL WORKSTATION THAT GOES WHERE THE WORK IS?

Fully assembled. Free freight shipping. 5-year warranty. Fifteen drawers for everyday tools, two independent locking cabinets for bigger gear, and ten feet of 1.2-inch reinforced work surface — all on wheels, ready to follow the job across any professional environment without leaving a single tool behind.

Available Finish

Industrial Powder-Coated Steel — available in Red or Blue

• Brand: Chery Industrial
• Model: 10ft 15-Drawer Rolling Workbench System
• Material: 18-Gauge Galvanized Steel
• Desktop Material: Q235 Steel + Powder Coated Finish
• Surface Finish: Powder-Coated Rust-Resistant Steel
• Overall Dimensions: 113" W x 23.6" D x 38.2" H
• Shipping Dimensions: 114" x 25" x 48"
• Weight: 546.5–569 lbs
• Worktop Size: 113" x 23.6"
• Desktop Thickness: 1.2"
• Load Capacity (Top): Up to 1,654 lbs
• Drawer Capacity: 88–99 lbs per drawer
• Drawer Count: 15
• Cabinets: 2 locking storage cabinets
• Drawer Slides: 3-section ball bearing slides
• Handles: Aluminum alloy full-width handles
• Drawer Pads: PVC anti-slip liners
• Lock System: Yes
• Mobility: Heavy-duty caster wheels included
• Assembly: Fully assembled (no setup required)
• Warranty: 5-Year Limited Warranty
• Shipping: US warehouse dispatch, estimated delivery 6–12 business days — standard freight, forklift or equivalent is required for unloading